>
>
>
>
>
>
>
LUMENIS Novus Spectra 532 Argon Green Ophthalmic Laser
Refurbished LUMENIS Novus Spectra 532 Argon Green Ophthalmic Laser with Zeiss Style Attachment Laser
$7,300
Lumenis Novus Sepctra 532 Argon Green Ophthalmic Laser with Zeiss Style Slit (120 or 130 models) Lamp Attachment SLA
This laser is in excellent refurbished condition. It has been fully serviced, aligned, and calibrated by our trained technicians and all diode outputs are within range. Full warranty included.
This slit lamp attachment fits Zeiss SL 130 or SL 120 slit lamps.
Manufacture slit lamp and table available for an additional charge.
SureSpot Optics: Sharply defined and evenly distributed power on the retina; Safe & low-power density at the cornea and the lens as with all Lumenis photocoagulators, the Novus Spectra incorporates SureSpot Optics technology in all slit lamp adapters.
The unique and patented SureSpot optics technology from Lumenis ensures that the focal point of the laser beam is maintained on the retina while power density on the cornea and lens is minimized for increased safety. SureSpot optics also creates a true 50-micron laser spot; that capability distinguishes the Lumenis technology from other lasers that may have a 100-micron minimum spot size and/or project a fuzzy laser spot on the retina.
In essence, SureSpot optics improves treatment efficacy and precision while reducing the potential for damage to anteriorsegment tissues. The latter occurrence is especially a concern when using wide-angle lenses that enhance light uptake by the cornea and lens.
Novus Spectra Laser Specifications
| Treatment Beam | |
| Type | Frequency-doubled Nd:YAG, diode-pumped solid-state |
| Wavelength | Green: 532 nm |
| Power output | 50–2500 mW |
| Duty cycle |
|
| Pulse duration | Factory pre-sets starting at 0.01 s up to 3.00 s (for durations greater than 1.00 s, power is limited to 500 mW) |
| Pulse interval | Factory pre-sets starting at 0.05 s up to 1.00 s and single pulse |
| Pulse counter | Counts pulses delivered; range = 0–9999 |
| Laser beam spot size | Controlled by delivery system |
| Illumination | The accessory port provides from 0–20 W of electrical power to an external bulb. Adjustable by pressing the illumination up/down buttons. |
| CDRH classification | Class IV |
| European MDD Laser Classification | Class 4 |
| Aiming Beam | |
| Type | Diode |
| Power | Adjustable up to <1.0 mW |
| CDRH classification | Class II |
| European MDD laser classification | 2 |
| Principal output | 630–680 nm (red) |
| Cooling | |
| Cooling | Air cooled |
| Electrical Requirements | |
| Voltage | 100–240 VAC ±10% |
| Frequency | 50/60 Hz, single phase |
| Wall outlet | 15 A, Dedicated service |
| Environmental Requirements (operating) | |
| Maximum altitude | 3,900 meters (13,000 feet) |
| Operating temperature | 10 °C to 37 °C (50 °F to 99 °F) |
| Maximum humidity | up to 90% at 37 °C (99°F) noncondensing |
| Environmental Requirements (nonoperating) | |
| Maximum altitude | Standard commercial shipping altitude |
| Operating temperature | -10 °C to 55 °C (14 °F to 131 °F) |
| Maximum humidity | 90% at 55 °C (131°F) noncondensing |
| Physical Characteristics | |
| Size (H x W x D) | 15.2 x 25.4 x 35.6 cm (6 x 10 x 14 in.) |
| Weight | 8 kg (17 lbs.) |
| Power cable length | 4.1 m (13.5 ft) U.S. 2.4 m (8 ft) International |
| Footswitch cable length | 4.6 m (15 ft) |
| Latex | This product is latex free |
| Laser Safety Eyewear | |
| Refer to “Laser Safety Eyewear” in the Safety and Regulatory section of this manual for detailed laser safety eyewear information. | |